New comic pages/ link buttons not displaying

Asarea · Post by **Asarea** » Sun Jan 11, 2004 9:10 am

Hi folks, it's me again .. *sigh*

Now my comic is up and running, the last days it had slight problems with some of my readers. The can't see the new pages and the buttons for my 'cast', 'links' etc. pages too - all images are still in public_html/images, all webpages exist, all comic pages, too. *I* can read everything without any problem, but two of my readers can't access the two new pages.

Please browse my page and tell me if you got the same problems - and maybe somebody here knows what's wrong .. *sigh*

Asarea

Asarea · Post by **Asarea** » Sun Jan 11, 2004 9:14 am

My banner seems to be gone, too ...

but the image file still IS on the server ... I don't understand this.

Faub · Post by **Faub** » Sun Jan 11, 2004 10:18 pm

I can see your archive without a problem. They probably have a firewall that is blocking referrers and need to fix this. They should also have problems viewing any site on Keenspace if this is the case.

I have no way of checking your banner because Keenspace disabled linking directly to images.

Phalanx · Post by **Phalanx** » Mon Jan 12, 2004 2:42 am

Night and Day reads fine for me, so it's probably the firewall.

Asarea · Post by **Asarea** » Mon Jan 12, 2004 6:53 pm

Hmm ... well ... gonna check this out. *sigh*

Thanx for visiting ...

Lana · Post by **Lana** » Mon Jan 12, 2004 9:06 pm

My greatest supporter has wrestled with his firewall and provided me with this info:

Open the "Norton Personal Firewall" and click "Options" in the top menu and select "Personal Firewall".

Click the "Web Content" tab

Click "Add Site" located in the bottom left and enter "lana.keenspace.com" then click "Ok".

Highlight "lana.keenspace.com" in the list of sites and then on the right uncheck the "Use default settings" on the "Information about visited sites" section and set it to "Permit"

Click "Ok" at the bottom of the window and close the "Norton Personal Firewall" window.

Refresh your web browser and you should see the site.

hope that does it ^_^

Faub · Post by **Faub** » Mon Jan 12, 2004 10:28 pm

Thanks. 8) I've been looking for that explanation for about 3 months now.

Post by **Kisai** » Tue Jan 13, 2004 11:43 pm

Addendum... YDK sites are configured to ONLY allow images to be loaded from itself and siteadmin2 (for one very obvious reason)

If you have a domain (this is another thing that is time consuming as hell) I have to manually go back and edit the settings so it works from the domain, or you get the same problem. Ask Ghastly.

Goatmon · Post by **Goatmon** » Mon Oct 18, 2004 12:54 am

Urm.....I don't have access to personal firewall as a seperate window. The only thing I can get into is Norton Internet Security, so the instructions are kind of difficult to follow. Can someone please walk me thorugh this? I am extremely computarded.